top of page

NS6000: 
automotive paint booth without civil engineering on metal basement with ramp.

Length: 

interior 6000mm
outside 6200mm

Lenght :
interior 4000mm
outside 4100mm

Height: 
interior 2650mm
outside 3700mm

Lighting: 24*40 watts
Air flow: 32 000 m3/Hour
Heating unit motor: 7.5 HP (5.5kw)
Burner heating unit: 200,000 Kcal/H
Max/heating temperature 60/80°C

* 1   Floor Filter / VOLTZ EU32
* 2   Exhaust (suction) NICOTRA
*3   Air Shock Absorber (Manual) SELLERPRO
* 4  Engine / GAMAK OR ABANA
* 5   Heat exchanger / SELLERPRO
* 6   Air Shock Absorber (Pneumatic) / 
      _cc781905-5cde-3194-bb3b-58d_SELLERPROSELLER
* 7   Pneumatic cylinder / WINMANN
* 8   Motor blower fan / 
         NICOTRA
* 9  Engine / GAMAK OR ABANA
* 10  Prefilter / VOLTZ EU4
* 11  Burner / RIELLO
* 12  Volet expression / SELLERPRO
*13  Side Panel/SELLERPRO
* 14  Wall (Panel) Insulation (50mm) / URSA
* 15  Grid/MEISER
* 16   Ground filters / VOLTZ
* 17  Service door / SELLERPRO
* 18   Door insulation (60mm) / URSA
* 19   Emergency exit handle / SAVIO
* 20  Lighting/PHILLIPS
* 21   Extraction box / SELLERPRO
* 22   Extraction box reinforcement / 
          _cc781905-5cde-3194 -bb3b-136bad5cf58d_  SELLERPRO
*23  Ramp/SELLERPRO
* 24   Vehicle entry door / 
          _cc781905-5cde-3194 -bb3b-136bad5cf58d_SELLERPRO
* 25  Tableau Digital / DELTA PLC MOELLER
*26  Ceiling Panel/SELLERPRO
*27   Ceiling insulation / URSA
* 28   Hot air box / SELLERPRO
* 29   Ceiling Filter / VOLTZ


- Access by facade composed of 3-leaf door
- 4-leaf door with neoprene gaskets for excellent resistance to solvents.
-High resistance to temperature and to 
  solvent vapours. - Large glazed area 
  for the interior view of the cabin.
- Closure made of steel material 
   with reinforced handle and hinges 
    adjustable in depth and height.
- Door thickness 60 mm

SERVICE DOOR 

- Glazed area for vision inside the 
   cabine
- Closing with panic bar
- Thermal insulation.
- MO fire classification
- Door thickness 60 mm

 

 

 

 

DESCRIPTION

The side walls are made of 1 mm galvanized sheet metal, with 40 mm glass wool insulation.  In order to provide an ergonomic view and longer life, the outer surface of the panels is painted with imported static powder paint.

Our products have the lighting system that has been designed to optimize color control during the painting phase.

In the paint booth, there is a suspension system with rails hanging from the ceiling, which makes it possible to paint parts next to the automobile.

The ceiling is the section that ensures the homogeneous flow of air coming from the heat exchanger, through the plenum and the filters.

The ceiling consists of sheet metal panels with a special insulating backing, and in order to clean the air supplied to the cabin, a filter element made of non-flammable, special high-performance, long-life material is placed under the ceiling.

There are 3 doors in the front and rear of the cabin, and 1 door system for personnel entry and exit. Door items have windows observation made  of safety glasses.  The thickness of the doors is 55 mm and insulated with 55 mm glass wool._cc781905-5cde-3194-bb3b -136bad5cf58d_All windows include glasses.

 

Make-up air unit:

This unit supplies filtered fresh air into the booth and throws the air used upside down during painting. 60°C and supplies the cabin, mixes the used air with fresh air at the rate of 10% (through the multi-damper) and circulates it after reheating.

Air heating is provided by a diesel or oil burner with a capacity of 150,000 kcal / h and a heat exchanger made of 304 quality stainless steel sheet. The first start and Raising the air temperature to 60°C takes about 15 minutes, depending on outside weather conditions.

The distribution of heated or unheated air in the cabin or its circulation is provided by two industrial-type fans, each with a capacity of 18,000 m³ / h. In this device, the air is routed to the cabin after being filtered by a pre-filter.  In addition, the outlet air is controlled by a damper in the outlet air channel.

 

Electrical system

Electrical and control panel

A panel in which motors and appliances within the enclosure of the proposal are operated and controlled from a central point to enable them to perform their functions.

The panel is made of GALVANIZED sheets and steel profiles, which are impact resistant, fully covered, waterproof and moisture proof.

  The panel must include all the necessary switches and fuses for the motors and electrical appliances, if applicable the signal lamps, the thermal relay, the contactor and the keys.

Wiring

Command and control connections from the electrical panel to motors and other electrical devices should be made with heat resistant cables. replacement is easy.

Ready-to-use devices: 380 V 50 Hz.  The voltage of the control devices is 24 volts

 

automotive paint booth 

paint booth auto 

car paint booth 

body paint booth 

vehicle paint booth 

PAINT BOOTH NS6000 sellerpro

€19,790.00Price
    bottom of page